Datamax Iclass Operator's Manual page 109

Printing (continued)
Maximum Print Width:
Print Length Range:
with cutter:
with peel & present:
Print Justification:
Flash Memory:
SDRAM Memory:
Media Types:
Media Roll Capacity:
Media Core:
Ribbon Core:
Ribbon Width Range:
Ribbon Length:
I-Class
4.10" (104.0 mm): I-4206, I-4208, I-4212
4.16" (105.7 mm): I-4308
4.10" (104.0 mm): I-4406
4.16" (105.7 mm): I-4604
.25"- 99" (6.4 - 2514.6 mm): I-4206, I-4208, I-4212, I-4308
.25"- 84" (6.4 - 2133.6 mm): I-4406
.25"- 55" (6.4 - 1397 mm): I-4604
1.25"- 99" (31.8 - 2514.6 mm): I-4206,I-4208, I-4212, I-4308
1.25" - 84" (31.8 - 2133.6 mm): I-4406
1.25" - 55" (31.8 - 1397 mm): I-4604
1.50" - 99" (38 – 2514.6 mm): I-4206, I-4208, I-4212, I-4308
1.50" - 84" (38 – 2133.6 mm): I-4406
1.50" - 55" (38 – 1397 mm): I-4604
Left
1 MB: I-4206, I-4208
2 MB: I-4212, I-4308, I-4406, I-4604
8 MB: I-4206, I-4208
16 MB: I-4212, I-4308, I-4406, I-4604
Roll-Fed, Die-Cut, Continuous, and Fan-Fold. Flat on the
printable side with no more than .0007" (.018 mm) protrusions
on the opposite side.
8" (203 mm) outer diameter, wound out labels only
1.5" or 3.0" (38 mm or 76.2 mm) inner diameter
1.010" ± .006" (25.6 mm ± .2 mm) inner diameter. Core not to
protrude beyond ribbon edge.
1.0" – 4.5" (25.4 mm – 114.3 mm), where Coated Side In and
Coated Side Out ribbon is NOT interchangeable and is specified
by the Thermal Transfer option type; also, width should
slightly exceed that of the media and backing, if any, to
protect the printhead.
1968 feet (600 meters) maximum
99