Printer Options - Datamax A-Class A-4212 Operator's Manual

4.2.3 Printer Options

The Printer Options menu contains module, file handling, and option functions:
Menu Item
MODULES
PRINT DIRECTORY
PRINT FILE
FORMAT MODULE
DELETE FILE
PACK MODULE
CUTTER
MODE
AUTO
ENABLED
DISABLED
CUT BEHIND
0 (0 – 2)
A-Class
Controls module functions (see Appendix A), where:
Prints files present and available memory in a module.
(Selecting ALL will print the results from every
module.)
Displays a list of stored files then prints the selected
file image or name.
Selects from a list of modules available for formatting.
All data in the selected module will be erased.
Deletes a file name, preventing further access.
(Protected modules will not appear.)
Reclaims all storage space associated with the deleted
files on the specified module.
Controls the Cutter and queuing functions, where:
Sets the detection method and printer response,
where:
The presence of the cutter is automatically sensed. If
detected, the cutter is enabled; otherwise, it will be
ignored.
Enables the cutter. If the cutter is not detected, a fault
will be generated.
Disables the cutter.
Allows a number of small labels to queue before a cut
is performed, increasing throughput, where:
(1) Can be used without a cutter to allow the
presentation of an extra label, as retraction will not
be performed until the next job or feed.
(2) After a fault, the leading edge will be cut to
ensure material length.
Is the number of labels queued before cutting; see
Appendix A for details.
Details
39