Warranty Information - Datamax Iclass Operator's Manual

Warranty Information

Datamax Barcode Products
Limited Warranty Statement
I-Class Printers
Printer
Datamax warrants* to Purchaser that under normal use and service, the I-Class Printers,
(with the exception of the thermal printhead, platen roller, and belts) purchased hereunder
shall be free from defects in material and workmanship for a period of two years, (730
days), or two million (2,000,000) linear inches of use, whichever comes first, from the date
of shipment by Datamax.
Expendable and/or consumable items or parts such as lamps, fuses, labels and ribbons are
not covered under this warranty. This warranty does not cover equipment or parts that have
been misused, altered, neglected, handled carelessly, or used for purposes other than those
for which they were manufactured. This warranty also does not cover loss, damages
resulting from accident, or damages resulting from unauthorized service.
Thermal Printhead, Platen Roller, and Belts
This warranty* is limited to a period of one year, (365 days), or one million (1,000,000)
linear inches of use, whichever comes first, for the I-Class thermal printhead, platen roller,
and belts. This one year (365 days) warranty is valid only if a Datamax - approved thermal
label media is used, as defined in the then current Datamax list of approved
thermal/thermal transfer media, a copy of which is available from Datamax. Failure to use
Datamax-approved media is justification for invalidation of this warranty. This warranty
does not cover printheads or platen rollers which have been misused, altered, neglected,
handled carelessly, or damaged due to improper cleaning or unauthorized repairs.
*When returned to the factory for service.
Warranty Service Procedures
If a defect should occur during the warranty period, the defective unit shall be returned,
freight and insurance prepaid, in the original shipping containers, to one of the following
locations:
I-Class 119