Exit Interface Card Assembly Removal - Lexmark X862de Service Manual

Exit interface card assembly removal

1.
Remove the top cover assembly. See
2.
Disconnect all the connectors from the exit interface card assembly (A).
Note: Connector P430 has a hook that must first be released.
3.
Remove the two screws securing the exit interface card assembly (A).
4.
Release the plastic supports securing the exit interface card assembly (A).
5.
Remove the exit interface card assembly (A) along with the bracket (B).
6.
Remove the two screws securing the exit interface card assembly (A) to the bracket (B).
Connector
Connector
"Top cover assembly removal" on page
Plastic support
A
B
Front
7500-432, -632, and -832
4-5.
4-117
Repair information
Previous
Next
Go Back