7500-432, -632, and -832
USB-Smart card-LED cable assembly removal
1.
Remove the operator panel assembly. See
2.
Remove the operator cover assembly. See
3.
Release the Smart card cable and the USB cable from the operator panel top cover.
4.
Remove the three screws securing the rear frame (A) to the operator panel bottom cover (B).
5.
Lift the rear frame (A), and remove.
4-144
MFP Service Manual
"Operator panel assembly removal" on page
"Operator panel cover assembly removal" on page
A
B
Previous
4-135.
4-140.
Next
Go Back