2000-sheet dual input (TTM)—switch (TTM media size) removal
Note: This removal procedure may be applied to tray 3 and tray 4.
1.
Remove the tray 3 assembly See
page
4-224) or tray 4 assembly
page
4-223).
2.
Disconnect the connector from the switch (TTM media size) (A).
3.
Remove one screw securing the switch (TTM media size) (A).
4.
Remove the switch (TTM media size) (A).
("2000-sheet dual input (TTM)—tray 3 assembly removal" on
("2000-sheet dual input (TTM)—tray 4 assembly removal" on
Rear
Connector
7500-432, -632, and -832
A
Repair information
Previous
Next
Go Back
4-249