Sensor (Adf Registration) Off Jam (Inverting) - Lexmark X862de Service Manual

Step
11 Place an undamaged document in the ADF, and perform a
ADF test.
Does the error remain?

290.15 Sensor (ADF registration) off jam (inverting)

Step
1 Check the original document condition.
Is the original document free of paper clips and staples as
well as damage such as creases, tears, holes, or
excessive wear?
2 Check the ADF rolls for wear.
Is the ADF feed/pick roll assembly or the ADF separation
roll guide assembly free of excess wear?
3 Check the media path for contaminates.
Is the media path free of excess media dust and foreign
objects such as paper clips and staples?
Check
Check
7500-432, -632, and -832
Yes
Replace the RIP Problem solved.
card assembly.
Go to "RIP card
assembly
removal" on
page 4-130.
Yes
Go to step 2. Remove
damaged
original
document, and
replace with a
new undamaged
original
document.
Perform a ADF
test. If the
problem
remains, go to
step 2.
Go to step 3. Clean or replace
the ADF feed/
pick roll
assembly or the
ADF separation
roll guide
assembly.
Go to
feed/pick roll
assembly
removal" on
page 4-186
"ADF
separation roll
guide
assembly" on
page 4-203.
Go to step 4. Remove all
contaminates
from the media
path.
Diagnostic information
Previous
No
Next
Go Back
No
"ADF
or
2-99