Operator Panel Controller Card Removal - Lexmark X862de Service Manual

Operator panel controller card removal

1.
Remove the operator panel assembly. See
2.
Remove the operator panel cover assembly. See
page 4-140.
3.
Disconnect all the connectors from the operator panel controller card (A).
4.
Remove the four screws securing the operator panel controller card (A) to the top cover.
5.
Remove the operator panel controller card (A).
Note: Before reinstalling the operator panel controller card (A), ensure that all connections are properly
replaced.
Note: Before reinstalling the operator panel assembly, ensure that all ground wires are properly replaced.
"Operator panel assembly removal" on page
"Operator panel cover assembly removal" on
A
Connectors
7500-432, -632, and -832
4-135.
4-147
Repair information
Previous
Next
Go Back