Lexmark X862de Service Manual page 120

7500-432, -632, and -832
Error code or
message
290.14
Scanner jam
Remove all
originals from
the scanner.
290.15
Scanner jam
Remove all
originals from
the scanner.
290.21
Scanner jam
Remove all
originals from
the scanner.
290.22
Scanner jam
Remove all
originals from
the scanner.
290.23
Scanner jam
Remove all
originals from
the scanner.
291.00
Scanner jam
Remove all
originals from
the scanner.
291.01
Scanner jam
Remove all
originals from
the scanner.
291.02
Scanner jam
Remove all
originals from
the scanner.
2-20
MFP Service Manual
Error contents
Sensor (ADF inverter) on jam
(Inverting)
Sensor (ADF registration) off
jam (inverting)
Sensor (ADF width APS 1)
static jam
Sensor (ADF width APS 2)
static jam
Sensor (ADF width APS 3)
static jam
Sensor (ADF registration)
static jam
Sensor (ADF inverter) off jam
(Inverting)
Sensor (ADF inverter) on jam
2
Description/Action
After the sensor (ADF registration) turned on during
the Invert operation, the sensor (ADF inverter) did
not turn on within the specified time.
Go to "290.14 Sensor (ADF inverter) on jam
(Inverting)" on page 2-97.
After the sensor (ADF pre-registration) turned off at
Invert, the sensor (ADF registration) did not turn off
within the specified time.
Go to "290.15 Sensor (ADF registration) off jam
(inverting)" on page 2-99.
The system detected that the sensor (ADF width
APS 1) is on.
Go to "290.21 Sensor (ADF width APS 1) static
jam" on page 2-102.
The system detected that the sensor (ADF width
APS 2) is on.
Go to "290.22 Sensor (ADF width APS 2) static
jam" on page 2-103.
The system detected that the sensor (ADF width
APS 3) is on.
Go to "290.23 Sensor (ADF width APS 3) static
jam" on page 2-104.
The system detected that the sensor (ADF
registration) is on.
Go to "291.00 Sensor (ADF registration) static
jam" on page 2-104.
After the sensor (ADF registration) turned off during
the Invert operation of the last document, the sensor
(ADF inverter) did not turn off within the specified
time.
After the ADF registration motor turned on (CCW)
during Invert operation, the sensor (ADF inverter)
did not turn off within the specified time.
Go to "291.01 Sensor (ADF inverter) off jam
(inverting)" on page 2-105.
After the Read Speed Control operation started, the
ADF registration motor turned on (CCW)), the
sensor (ADF inverter) did not turn on within the
specified time.
Go to "291.02 Sensor (ADF inverter) on jam 2" on
page 2-107.
Previous
Next
Go Back