ADF left cover media guide removal
1.
Open the ADF left cover assembly.
2.
Remove the screw securing the ADF left cover media guide (A).
3.
Lift the ADF left cover media guide (A) upward, then remove the two bosses from the slot, and remove the
two tabs from the holes.
4.
Remove the ADF left cover media guide (A).
Note: Before reinstalling the ADF left cover media guide (A), ensure that the two bosses and two tabs are
correctly installed, or jamming will occur.
Boss
7500-432, -632, and -832
Boss
A
Tabs
Repair information
Previous
Next
Go Back
4-189