Lexmark X862de Service Manual page 144

7500-432, -632, and -832
Step
5 Check the drive power transmission.
Do the exit 2 media exit roll assembly and the other
gears rotate smoothly?
6 Check the sensor (exit 2) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch BASE SENSOR TEST.
3. Touch Media Path.
4. Touch Exit2.
Open the printer left door assembly and the exit 2 left
door assembly.
Does the display on the operator panel change every
time the actuator on the above sensor operates?
7 Check the sensor (exit 2) for proper connection.
Is the above sensor connected properly?
8 Check the exit 2 drive motor for proper operation.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch Printer Motor Test.
4. Touch Exit2 drive mtr.
5. Touch Forward or reverse.
Does the above motor rotate normally?
9 Check the exit 2 drive motor for proper connection.
Is the above motor connected properly?
10 Perform a print test.
Does the error still occur?
11 Perform a print test.
Does the error still occur?
2-44
MFP Service Manual
Check Yes
Go to step 6. Replace damaged
parts.
Go to
assembly removal"
on page
Go to step 8. Go to step 7.
Replace the sensor Replace the
(exit 2). connection.
Go to "Exit 2
sensor (exit 2)
removal" on
page 4-335.
Go to step 10. Go to step 9.
Replace the exit 2 Replace the
unit assembly. connection.
Go to "Exit 2 unit
assembly removal"
on page 4-322.
Replace the exit Problem solved.
interface card
assembly.
Go to "Exit
interface card
assembly removal"
on page 4-117.
Go to step 11.
Replace the printer Problem solved.
engine card
assembly.
Go to "Printer
engine card
assembly removal"
on page 4-119.
Previous
No
"Exit 2 unit
Next
4-322.
Go Back