2000-Sheet Dual Input (Ttm)-Tray 3 Rear Cable Assembly Removal - Lexmark X862de Service Manual

7500-432, -632, and -832
2000-sheet dual input (TTM)—tray 3 rear cable assembly removal
1.
Remove the left cover. See
2.
Remove the tray 3 assembly. See
page 4-224.
3.
Remove the tray 3 front cover. See
page 4-225.
4.
Remove the E-clip with a prying tool securing the front lift cable pulley (A) to the tray lift shaft assembly (B).
5.
Gently move the tray lift shaft assembly (B) toward the rear of the tray and detach the rear bushing (C)
from the frame.
Note: Do not remove the front lift cable pulley (A) or the front lift cables will become detached.
6.
Move the rear portion of the tray lift shaft assembly (B) away from the frame.
4-226
MFP Service Manual
"2000-sheet dual input (TTM)—left cover removal" on page
"2000-sheet dual input (TTM)—tray 3 assembly removal" on
"2000-sheet dual input (TTM)—tray 3 front cover removal" on
Previous
4-218.
Next
Go Back