Adf Feed-Out Roll Assembly Removal - Lexmark X862de Service Manual

ADF feed-out roll assembly removal

1.
Remove the ADF unit assembly. See
2.
Open the ADF left cover assembly.
3.
Remove the ADF front cover assembly. See
4.
Remove the ADF rear cover. See
5.
Remove the document tray assembly. See
6.
Remove the ADF registration motor. See
7.
Remove the ADF media feed assembly. See
8.
Remove the ADF feed drive motor assembly. See
page 4-180.
9.
Lift the separation roll guide assembly to its uppermost position.
10.
Remove the actuator/media guide assembly. See
page 4-198.
11.
Loosen the screw securing the tension bracket (A) and loosen the registration secondary belt (B) tension.
12.
Remove the tension spring (B).
13.
Loosen the screw securing the small tension bracket (C).
14.
Remove the exit roll drive belt (D).
15.
Remove the registration secondary drive belt (E).
16.
Remove the plastic clip securing the exit/feed-out roll drive pulley 25/28T (F).
17.
Remove the exit/feed-out roll drive pulley 25/28T (F).
18.
Remove the bearing 8 mm (G) securing the ADF feed-out roll assembly (H) to the rear of the feed
assembly.
19.
Remove the plastic clip securing the manual feed drive pulley (I).
20.
Remove the manual feed drive pulley (I).
21.
Remove the manual feed drive belt (J).
22.
Remove the bearing 8 mm (K) securing the feed-out roll assembly to the front of the feed assembly.
"ADF unit assembly removal" on page
"ADF front cover assembly removal" on page
"ADF rear cover removal" on page
"Document tray assembly removal" on page
"ADF registration motor removal" on page
"ADF media feed assembly removal" on page
"ADF feed drive motor assembly removal" on
"Actuator/media guide assembly removal" on
7500-432, -632, and -832
4-167.
4-174.
4-173.
4-172.
4-209.
4-170.
4-201
Repair information
Previous
Next
Go Back