Lexmark X862de Service Manual page 280

7500-432, -632, and -832
Step
4 Perform a print test.
Does the error continue?
No media in the select media tray
Step
1 Check the media.
Is the media loaded in the selected tray?
2 Check the sensor (media out) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch INPUT TRAY TESTS.
3. Touch Sensor test.
4. Touch Tray 3.
5. Touch Media out.
1. Enter the Diagnostics Menu.
2. Touch INPUT TRAY TESTS.
3. Touch Sensor test.
4. Touch Tray 4.
5. Touch Media out.
Remove the appropriate media tray assembly.
Does the display on the operator panel change every
time the sensing area on the above sensor is blocked by
the media out actuator.
3 Check the sensor (media out) for proper connection.
Check tray 3 and tray 4.
Is the above sensor connected properly?
4 Check the 2TM/TTM controller card assembly and the
printer engine card assembly for proper connection.
Are connectors P541 and P413 on the above cards
connected properly?
5 Perform a print test.
Does the error still occur?
2-180
MFP Service Manual
Check
Check
Yes
Replace the Problem solved.
printer engine card
assembly.
Go to "Printer
engine card
assembly
removal" on
page 4-119.
Yes
Go to step 2. Load media
properly.
Go to step 4. Go to step 3.
Replace the Replace the
appropriate sensor connection.
(media out).
Go to "2000-sheet
dual input (TTM)—
sensor (media out)
removal" on
page 4-262.
Go to step 5. Replace the
connection.
Replace the 2TM/ Problem solved.
TTM controller card
assembly.
Go to "2000-sheet
dual input (TTM)—
2TM/TTM controller
card assembly
removal" on
page 4-281.
Go to step 6.
Previous
No
Next
Go Back
No