7500-432, -632, and -832
2000-sheet dual input (TTM)—media feed unit drive gear 28 / 21 tooth removal
1.
Remove the media feed unit assembly. See
removal (tray 3)" on page 4-250
removal (tray 4)" on page
2.
Remove the harness from the bracket (A).
3.
Remove the three screws securing the bracket (A) to the media feed unit assembly.
4.
Remove the bracket (A).
Note: The gears may become detached from the bracket (A).
5.
Remove the feed unit drive gear - 28 tooth / 21 tooth (B).
Clamp
Note: Before re-installing, ensure all gears and washers are securely attached to the bracket (A).
4-264
MFP Service Manual
or
"2000-sheet dual input (TTM)—media feed unit assembly
4-246.
Harness
A
Rear
"2000-sheet dual input (TTM)—media feed unit assembly
Washer
B
Rear
Previous
Next
Go Back