Scanner Cooling Fan Removal - Lexmark X862de Service Manual

7500-432, -632, and -832

Scanner cooling fan removal

1.
Remove the ADF unit assembly. See
2.
Remove the scanner left cover. See
3.
Remove the scanner right cover. See
4.
Remove the scanner top rear cover. See
5.
Disconnect the connector from the scanner cooling fan (A).
6.
Remove the harness from the clamp.
7.
Lift the scanner cooling fan (A) upward in the direction of the arrow.
8.
Remove the scanner cooling fan (A).
Note: Before reinstalling the scanner cooling fan (A), ensure that the label on the scanner cooling fan (A) is
facing toward the rear of the scanner unit assembly.
Connector
4-164
MFP Service Manual
"ADF unit assembly removal" on page
"Scanner left cover removal" on page
"Scanner right cover removal" on page
"Scanner top rear cover removal" on page
Rear
Clamp
4-167.
4-133.
4-134.
A
Previous
4-132.
Go Back
Next