Lexmark X862de Service Manual page 56

7500-432, -632, and -832
Cleaning
The Cleaning Blade removes any toner that remains on the drum after the transfer process. The toner that the
Cleaning Blade removes is collected inside the sealed PC Cartridge and reused.
Used Toner
Cleaning Blade
Discharge
At both the start and the end of each individual printer cycle, the HVPS supplies the charge roll with an AC
voltage that is used to electrically clean the drum. The AC voltage removes any residual DC charge that was left
from the previous print cycle.
At the beginning of each individual printer cycle, the Printhead scans the surface of the drum, further discharging
any residual DC charge that may be left on the drum.
1-32
MFP Service Manual
DRUM
VAC
DRUM
Ground
Charge roll
VAC
Charge roll
HVPS
Ground
Previous
Next
Go Back