Lexmark X862de Service Manual page 681

8.
Disconnect the connector of the harness from duplex drive motor assembly (D) to the duplex main cable
assembly.
9.
Release the harness from the clamps of the duplex unit assembly.
10.
Remove the three screws securing the bracket (E) to the duplex unit assembly.
11.
Remove the bracket (E).
12.
Remove the duplex drive gear 42T (F).
F
Rear
Clamps
E
Connector
D
Repair information
7500-432, -632, and -832
4-301
Previous
Next
Go Back