Mpf Fold Down Tray Assembly Removal - Lexmark X862de Service Manual

MPF fold down tray assembly removal

1.
Remove the MPF rear cover. See
2.
Remove the MPF feed unit assembly. See
3.
Remove the MPF upper frame. See
page 4-55.
4.
Remove the pickup spring (A) from the idler gear bracket assembly (B).
Note: Leave the pickup spring (A) attached to the MPF feed drive gear pickup (C).
5.
Remove three screws securing the idler gear bracket assembly (B) to the MPF feed unit assembly.
6.
Remove the idler gear bracket assembly (B).
7.
Remove the green ground wire (D) from the idler gear bracket assembly (B).
8.
Remove the green (D) ground wire from the clamp.
A
Rear
"MPF rear cover removal" on page
"MPF feed unit assembly removal" on page
"MPF media out actuator and upper frame removal" on
C
Hook
D
B
7500-432, -632, and -832
4-58.
4-54.
Repair information
Previous
Next
Go Back
4-65