Unpacking And Setting-Up The Printer - CAB HERMES Q2L Assembly Instructions Manual

2 Installation
10
2.2

Unpacking and Setting-up the Printer

 Lift the printer out of the box.
 Check printer for damage which may have occurred during transport.
 Remove foam transportation safeguards near the printhead.
 Check delivery for completeness.
Contents of delivery:
• Printer
• Power cable
• USB cable
• Assembly instructions
• DVD with label software, Windows driver and documentation
i
Note!
Please keep the original packaging in case the printer must be returned.
!
Attention!
The device and printing materials will be damaged by moisture and wetness.
 Set up printers only in dry locations protected from splash water.
Table 1 Permitted mounting orientations
• Fixing at four M6x10 drillings on the bottom side of the chassis
 Orientation upright standing only
• Fixing via bracket at each two M6 drillings on both sides of the
chassis
 Orientation vertically, turnable by 360 degrees
• Fixing via bracket at each two M6 drillings on both sides of the
chassis
 Orientation horizontally, with operator's side up
10