2
Installation
8
2.2
Unpacking and Setting-up the Printer
Lift the label printer out of the box.
Check label printer for damage which may have occurred during transport.
Set up printer on a level surface.
Remove foam transportation safeguards near the printhead.
Check delivery for completeness.
Contents of delivery:
•
Label printer
•
Power cable
•
USB cable
•
WLAN stick
•
Operator's Manual
•
DVD with label software, Windows driver and documentation
i
Notice!
Please keep the original packaging in case the printer must be returned.
!
Attention!
The device and printing materials will be damaged by moisture and wetness.
Set up label printers only in dry locations protected from splash water.
2.3
Installing the WLAN stick
1
2
Figure 5
Installing the WLAN stick
Remove the cover (1) with the Allen key (2).
Connect the WLAN stick (4) to the USB interface (3) in the control panel.
3
4
8