6.7.2.5
showrev Command
The showrev command displays revision information for the current hardware and
software.
CODE EXAMPLE 6-13
# showrev
Hostname: griffith
Hostid: 830f8192
Release: 5.8
Kernel architecture: sun4u
Application architecture: sparc
Hardware provider: Sun_Microsystems
Domain:
Kernel version: SunOS 5.8 Generic 108528-16 August 2002
When used with the -p option, this command displays installed patches.
CODE EXAMPLE 6-14
the -p option.
showrev -p Command Output
CODE EXAMPLE 6-14
# showrev -p
Patch: 109729-01 Obsoletes:
Patch: 109783-01 Obsoletes:
Patch: 109807-01 Obsoletes:
Patch: 109809-01 Obsoletes:
Patch: 110905-01 Obsoletes:
Patch: 110910-01 Obsoletes:
Patch: 110914-01 Obsoletes:
Patch: 108964-04 Obsoletes:
6.7.3
To Run Solaris System Information Commands
1. Decide on the of system information you want to display.
For more information, see
2. Type the appropriate command at a console prompt.
See
TABLE 6-5
6-24
Sun Fire V210 and V240 Servers Administration Guide • December 2005
shows sample output of the showrev command.
CODE EXAMPLE 6-13
showrev Command Output
shows a partial sample output from the showrev command with
Requires:
Requires:
Requires:
Requires:
Requires:
Requires:
Requires:
Requires:
"Solaris System Information Commands" on page
for a summary of the commands.
Incompatibles:
Packages: SUNWcsu
Incompatibles:
Packages: SUNWcsu
Incompatibles:
Packages: SUNWcsu
Incompatibles:
Packages: SUNWcsu
Incompatibles:
Packages: SUNWcsu
Incompatibles:
Packages: SUNWcsu
Incompatibles:
Packages: SUNWcsu
Incompatibles:
Packages: SUNWcsr
17.