To Run Solaris System Information Commands; Table 8-10 Showrev -P Command Output; Table 8-11 Using Solaris Information Display Commands - Sun Microsystems Sun Fire V445 Administration Manual

When used with the -p option, this command displays installed patches.
shows a partial sample output from the showrev command with the -p option.
TABLE 8-10
Patch: 109729-01 Obsoletes:
Patch: 109783-01 Obsoletes:
Patch: 109807-01 Obsoletes:
Patch: 109809-01 Obsoletes:
Patch: 110905-01 Obsoletes:
Patch: 110910-01 Obsoletes:
Patch: 110914-01 Obsoletes:
Patch: 108964-04 Obsoletes:

To Run Solaris System Information Commands

▼
1. Decide what kind of system information you want to display.
For more information, see
2. Type the appropriate command at a console prompt.
See
TABLE 8-11
TABLE 8-11
Command What It Displays
Fault management information
fmadm
Fault management information
fmdump
System configuration
prtconf
information
Diagnostic and configuration
prtdiag
information
FRU hierarchy and SEEPROM
prtfru
memory contents
Date and time each CPU came
psrinfo
online; processor clock speed
Hardware and software revision
showrev
information
showrev -p Command Output
Requires:
Requires:
Requires:
Requires:
Requires:
Requires:
Requires:
Requires:
"Solaris System Information Commands" on page
for a summary of the commands.
Using Solaris Information Display Commands
What to Type
/usr/sbin/fmadm
/usr/sbin/fmdump
/usr/sbin/prtconf
/usr/platform/sun4u/sb
in/prtdiag
/usr/sbin/prtfru
/usr/sbin/psrinfo
/usr/bin/showrev
Incompatibles: Packages: SUNWcsu
Incompatibles: Packages: SUNWcsu
Incompatibles: Packages: SUNWcsu
Incompatibles: Packages: SUNWcsu
Incompatibles: Packages: SUNWcsu
Incompatibles: Packages: SUNWcsu
Incompatibles: Packages: SUNWcsu
Incompatibles: Packages: SUNWcsr
TABLE 8-10
178.
Notes
Lists information and
changes settings.
Use the -v option for
additional detail.
–
Use the -v option for
additional detail.
Use the -l option to display
hierarchy. Use the -c option
to display SEEPROM data.
Use the -v option to obtain
clock speed and other data.
Use the -p option to show
software patches.
Chapter 8 Diagnostics 189