To Run Solaris System Information Commands - Sun Microsystems Sun Fire V210 Manual

When used with the -p option, this command displays installed patches.
CODE EXAMPLE 6-15
the -p option.
Patch: 109729-01 Obsoletes:
Patch: 109783-01 Obsoletes:
Patch: 109807-01 Obsoletes:
Patch: 109809-01 Obsoletes:
Patch: 110905-01 Obsoletes:
Patch: 110910-01 Obsoletes:
Patch: 110914-01 Obsoletes:
Patch: 108964-04 Obsoletes:
CODE EXAMPLE 6-15

To Run Solaris System Information Commands

1. Decide what kind of system information you want to display.
For more information, see "Solaris System Information Commands" on page 67.
2. Type the appropriate command at a console prompt.
See
TABLE 6-6
TABLE 6-6
Command What It Displays
System configuration
prtconf
information
Diagnostic and configuration
prtdiag
information
FRU hierarchy and SEEPROM
prtfru
memory contents
Date and time each CPU came
psrinfo
online; processor clock speed
Hardware and software revision
showrev
information
shows a partial sample output from the showrev command with
Requires:
Requires:
Requires:
Requires:
Requires:
Requires:
Requires:
Requires:
showrev -p Command Output
for a summary of the commands.
Using Solaris Information Display Commands
What to Type
/usr/sbin/prtconf
/usr/platform/sun4u/
sbin/prtdiag
/usr/sbin/prtfru
/usr/sbin/psrinfo
/usr/bin/showrev
Incompatibles: Packages: SUNWcsu
Incompatibles: Packages: SUNWcsu
Incompatibles: Packages: SUNWcsu
Incompatibles: Packages: SUNWcsu
Incompatibles: Packages: SUNWcsu
Incompatibles: Packages: SUNWcsu
Incompatibles: Packages: SUNWcsu
Incompatibles: Packages: SUNWcsr
Notes
—
Use the -v option for
additional detail.
Use the -l option to display
hierarchy. Use the -c option
to display SEEPROM data.
Use the -v option to obtain
clock speed and other data.
Use the -p option to show
software patches.
Chapter 6 Diagnostics 75