KYMCO DINK 200 Manual page 155

13
. FUEL SYSTEM/CARBURETOR/FUEL PUMP
JETS/SCREWS REMOVAL
• Before removing the pilot screw, turn
the pilot screw clockwise until it seats
lightly and record the rotating turns.
Do not force the pilot screw against its
seat to avoid seat damage.
Remove the main jet, needle jet holder and
needle jet.
Remove the slow jet.
Clean the removed the main jet, needle jet
holder, needle jet and slow jet with detergent
oil.
• Be sure to use clean detergent oil.
13-9
Pilot Screw (P.S.)
Slow Jet
Needle Jet Holder
Pilot Screw
Needle Jet Holder
DINK 200
Main Jet
Slow Jet
Main Jet