Rear Fork; Rear Wheel - KYMCO DINK 200 Manual

15
. REAR BRAKE/REAR FORK/REAR
WHEEL/REAR SHOCK ABSORBER

REAR FORK

REMOVAL
Remove the exhaust muffler. (  2-6)
Remove the rear brake caliper. (  15-3)
Remove the right rear shock absorber lower
mount bolt.
Remove the rear axle nut and remove the
collar.
Remove the rear fork.
The installation sequence is the reverse of
removal.
Turn the inner race of each bearing with your
finger to see if they turn smoothly and
quietly.
Also check if the outer race fits tightly in the
hub.
Replace the bearings if the races do not turn
smoothly, quietly, or if they fit loosely in the
hub.

REAR WHEEL

REMOVAL
Remove the exhaust muffler. (  2-6)
Remove the rear brake caliper. (  15-3)
Remove the rear fork.
Remove the rear axle collar.
Remove the rear wheel.
INSPECTION
Measure the rear wheel rim runout.
Service Limits:
Radial: 2.0mm replace if over
Axial: 2.0mm replace if over
Shock Absorber Lower Mount Bolt
Collar
Axle Nut
Rear Brake Disk
Rear Axle Collar
DINK 200
Rear Fork
15-4