Thermosensor - KYMCO DINK 200 Manual

12
. COOLING SYSTEM

THERMOSENSOR

THERMOSENSOR REMOVAL
Remove the seat, met-in box and center
cover.
Drain the coolant.
Disconnect the thermosensor wire.
Remove the thermosensor.
THERMOSENSOR INSPECTION
Suspend the thermosensor in a pan of water
over a burner and measure the resistance
through the sensor as the water heats up.
Temperature(
Resistance(Ω)
THERMOSENSOR INSTALLATION
Apply 3-BOND No. 1212 sealant or
equivalent to the thermosensor threads and
install it into the thermostat housing.
Connect the thermosensor wire.
Fill the radiator with coolant. (  3-9)
Install the center cover, met-in box and seat.
(  2-3)
Be sure to bleed air from the cooling
system.
12-15
) 50 80 100
120
154 52 27 16
Thermosensor Wire
Thermosensor
Thermometer
Thermosensor Wire
DINK 200
Thermosensor
Thermosensor