Thermostat - KYMCO DINK 200 Manual

12
. COOLING SYSTEM

THERMOSTAT

THERMOSTAT REMOVAL
Remove the seat, met-in box and center
cover.
Drain the coolant.
Disconnect the thermosensor wire from the
thermosensor.
Disconnect the water hose from the
thermostat housing.
Disconnect the air vent tube from the
thermostat housing.
Remove the mounting bolt and the
thermostat housing from the cylinder head.
Remove the two bolts and separate the
thermostat housing halves.
Remove the thermostat from the thermostat
housing.
Thermostat Housing
Water Hose
Bolts
Thermostat
Thermostat
DINK 200
Air Vent Tube
Bolt
Thermosensor Wire
12-16