Engine Installation - KYMCO DINK 200 Manual

5. ENGINE REMOVAL/INSTALLATION

ENGINE INSTALLATION

Install the engine in the reverse order of
removal.
Tighten the engine mounting bolts.
Torque: 5.0kg-m
Tighten the rear shock absorber upper mount
bolts.
Torque: 4.0kg-m
After installation, inspect and adjust the
following:
• Throttle grip free play (  3-3)
• Fill the rear brake reservoir with brake fluid
and bleed air from the rear brake.
• Fill the cooling system with coolant and
start the engine to bleed air from the
system.
5-5
Engine Hanger Bolt
Rear Shock Absorber Upper Mount Bolts
DINK 200
Engine Mounting Nuts