KYMCO DINK 200 Manual page 204

17
. IGNITION SYSTEM
RESISTANCE INSPECTION
Measure the resistance between the terminals.
Replace the CDI unit if the readings are not
within the specifications in the table below.
• Due to the semiconductor in circuit, it
is necessary to use a specified tester
for accurate testing. Use of an
improper tester in an improper range
may give false readings.
• Use a Sanwa Electric Tester (07308-
0020000) or Kowa Electric Tester
(TH-5H).
• In this table, "Needle swings then
returns" indicates that there is a
charging current applied to a condenser.
The needle will then remain at "
unless the condenser is discharged.
x
Use the KΩ range for the Sanwa Tester.
x
Use the 100Ω range for the Kowa Tester.
(+)Probe
(Black/Blue) (Black/Yellow) (Green/White)
(-)Probe
(Black/Blue)
(Black/Yellow)
(Green/White)
(Blue/Yellow)
(Green)
Different data from different supplier.
17-5
Unit: KΩ
150~280
75~100
7~10 50~70
7~10 50~70
(Green/White)
(Green)
"
20~30
50~70
(Black/Blue)
(Black/Yellow)
(Blue/Yellow)
(Blue/Yellow)
(Green)
20~30
50~70
DINK 200