KYMCO DINK 200 Manual page 38

2
. EXHAUST MUFFLER/FRAME COVERS
FRONT UPPER COVER REMOVAL
Remove the right and left rearview mirrors.
Remove the two screws on the back of the
front upper cover.
Remove the two bolts on the front of the
front upper cover.
Disconnect the headlight wire connector.
Remove the front upper cover.
The installation sequence is the reverse of
removal.
FRONT LOWER COVER REMOVAL
First remove the front upper cover.
Remove the two screws attaching the front
lower cover.
Remove the four screws on the back of the
front lower cover.
Disconnect the right/left turn signal light wire
connectors.
Remove the front lower cover
The installation sequence is the reverse of
removal.
LEG SHIELD REMOVAL
Remove the front upper cover.
Remove the front lower cover.
Remove the four screws attaching the leg
shield and instruments and remove the fuse
box.
Remove the nut attaching the leg shield.
Remove the adjusting screw which combines
the leg shield with instruments.
Remove the leg shield.
The installation sequence is the reverse of
removal.
2-5
Bolts
Screws
Screws
Adjusting Screw
DINK 200
Screws
Screws