13
. FUEL SYSTEM/CARBURETOR/FUEL PUMP
DINK 200
Auto Bystarter
CARBURETOR REMOVAL
Remove the seat, met-in box and center
cover.
Disconnect the fuel tube and vacuum tube at
the carburetor.
Disconnect the auto bystarter wire.
Fuel Tube
Auto Bystarter Wire
Intake Manifold Band
Loosen the throttle cable adjusting nut and
lock nut, and disconnect the throttle cable
from the carburetor.
Loosen the air cleaner connecting tube band
and carburetor intake manifold band and then
remove the carburetor.
Air Cleaner Connecting Tube Band
VACUUM CHAMBER
DISASSEMBLY
Loosen the drain screw and drain the fuel
from the float chamber.
Drain Screw
13-6