Oil Pump Inspection; Oil Pump Assembly - KYMCO DINK 200 Manual

4
. LUBRICATION SYSTEM

OIL PUMP INSPECTION

Measure the pump body-to-outer rotor
clearance.
Service Limit: 0.25mm replace if over
Measure the inner rotor-to-outer rotor
clearance.
Service Limit: 0.20mm replace if over
Measure the rotor end-to-pump body
clearance.
Service Limit: 0.12mm replace if over

OIL PUMP ASSEMBLY

Install the outer rotor, inner rotor and pump
shaft into the pump body.
°Ø
Insert the pump shaft by aligning the flat
on the shaft with the flat in the inner
rotor. Install the dowel pin.
There is one mark on the surface of the inner
rotor and outer rotor.
The mark is upside.
4-5
Pump Body
Outer Rotor
Pump Body
Dowel Pin
Outer Rotor Inner Rotor
DINK 200
Outer Rotor
Inner Rotor
Rotor End
Pump Body
Pump Shaft