KYMCO DINK 200 Manual page 5

1
. GENERAL INFORMATION
 Apply or add designated greases and
lubricants to the specified lubrication
points.
 After reassembly, check all parts for
proper tightening and operation.
 When two persons work together, pay
attention to the mutual working safety.
 Disconnect the battery negative (-) terminal
before operation.
 When using a spanner or other tools, make
sure not to damage the motorcycle surface.
 After operation, check all connecting
points, fasteners, and lines for proper
connection and installation.
 When connecting the battery, the positive
(+) terminal must be connected first.
 After connection, apply grease to the
battery terminals.
 Terminal caps shall be installed securely.
1-3
DINK 200