KYMCO DINK 200 Manual page 102

8
. DRIVE AND DRIVEN PULLEYS/
KICK STARTER
INSPECTION
Inspect the kick starter spindle and gear for
wear or damage.
Inspect the return spring for weakness or
damage.
Inspect the kick starter spindle bushings for
wear or damage.
Inspect the starter driven gear for wear or
damage.
Inspect the friction spring for wear or
damage.
Inspect the kick starter spindle and starter
driven gear forcing parts for wear or damage.
INSTALLATION
Install the kick starter spindle bushings and
return spring onto the left crankcase cover.
When installing the return spring, use a
screw driver to press the inward and
outward return spring hooks into their
original positions respectively.
Install the starter driven gear and friction
spring as the figure shown.
Install the plate.
Spindle Plastic Bushing
Return Spring
Friction Spring
Starter Driven Gear
Kick Starter Spindle Forcing Part
Starter Driven Gear Shaft Forcing Part
Starting Ratchet
Friction Spring
Kick Starter Spindle
DINK 200
Spindle Bushing
8-16