Cisco ASR 1000 series Hardware Installation Manual page 91

Chapter 2 Cisco ASR 1000 Series Routers Component Overview
Cisco ASR 1001 Router AC Power Supply
The Cisco ASR 1001 Router has two AC power supplies in the rear of the chassis. The input receptacle
is an IEC60320 C14 type of filtered AC inlet. The current rating on the connector is 10 A.
shows the ASR 1001 Router AC power supplies.
Figure 2-19
Cisco ASR 1001 Router DC Power Supply
The Cisco ASR 1001 Router DC input connector is compatible with a pluggable Euro-style plug. The
input connector and plug must be UL recognized under UL 486 for field wiring. The connection polarity
is from left to right: negative (–), positive (+), and ground.
The power supply has a handle to be used for insertion and extraction. The module must be supported
with one hand because of its length.
Figure 2-20
1
OL-13208-11
Cisco ASR 1001 Router AC Power Supplies
Cisco ASR 1001 Router With DC Power Supplies
DC power supply in slot PS0
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
0
1
Figure 2-20 shows the Cisco ASR 1001 Router DC power supplies.
1 2
2
DC power supply in slot PS1
Power Supplies for the Cisco ASR 1001 Router
Figure 2-19
2-51