Cisco ASR 1000 series Hardware Installation Manual page 559

Appendix A Cisco ASR 1000 Series Router Specifications
Cisco ASR 1013 Router Memory and Storage Options
Table A-25
Table A-25 Memory and Storage Options for Cisco ASR 1013 Router
Memory Type
R21– DRAM
FECP – DRAM
eUSB – Internal Flash + NVRAM
Cisco ASR 1013 Router Ethernet RJ-45 Port Pinouts
The Cisco ASR 1013 Router has RJ-45 port for the 10/100/1000 Ethernet connections. The RJ-45 port
supports IEEE 802.3ab (Gigabit Ethernet) and IEEE 802.3u (Fast Ethernet) interfaces compliant with
10BASET, 100BASETX, and 1000BASET specifications.
The RJ-45 port supports standard straight-through and crossover Category 5 UTP cables with RJ-45
connectors. Cisco does not supply Category 5 UTP cables; these cables are available commercially.
Cisco ASR 1013 Router MGMT Ethernet Port Signals and Pinouts
Table A-26
Table A-26
Pin
1
2
3
4, 5
6
7,8
OL-13208-11
lists the hardware memory and storage options supported on the Cisco ASR 1013 Router.
Default
8 GB
1 GB for ASR1000-ESP-5
2 GB for ASR1000-ESP10
8 GB on the integrated RP on
the Cisco ASR 1002 Router
(partitioned: 1 GB for
bootflash; 7 GB for mass
storage)
lists the RJ-45 port pinout for the front panel Management Ethernet port.
Management Ethernet 10/100/1000 RJ-45 Port Pinouts for Cisco ASR 1013 Router
Signal
TX Data+
TX Data–
RX Data+
NC
RX Data–
NC
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
Maximum System Support
8 GB
2 GB
8 GB – Not Field Upgradeable
Direction
Output
Output
Input
—
Input
—
Cisco ASR 1013 Router Specifications
Description
Transmit Data
Transmit Data
Receive Data
—
Receive Data
—
A-15