Cisco ASR 1000 series Hardware Installation Manual page 150

Attaching the Chassis Rack-Mount Brackets
Position the front rack-mount bracket top hole with the chassis first top hole behind the side vent holes
Step 2
(see
Step 3 Insert and tighten the black screws on one side.
Repeat Step 1 through Step 3 on the other side of the chassis. Use black screws to secure the rack-mount
Step 4
brackets to the chassis.
Step 5 Install the chassis in the rack. To install the Cisco ASR 1006 Router in a rack, go to the
Cisco ASR 1006 Router in a Rack" section on page
This completes the steps for attaching the front rack-mount brackets to the Cisco ASR 1006 Router.
Chassis Rear Rack-Mount Brackets
If you are rack-mounting the chassis using the rear rack-mount brackets, then this type of installation
provides for the chassis being recessed in the rack.
To install the front rack-mount brackets on the Cisco ASR 1006 Router, perform the following steps:
Locate the threaded holes on the rear side of the chassis. Make certain that you hold the rear t rack-mount
Step 1
bracket with the ear and holes facing outward and towards the rear of the chassis.
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
6-12
Figure 6-8).
Chapter 6 Cisco ASR 1006 Router Overview and Installation
6-14.
"Installing the
OL-13208-11