Cisco ASR 1000 series Hardware Installation Manual page 57

Chapter 2 Cisco ASR 1000 Series Routers Component Overview
•
Cisco Integrated ASR1000-RP1 for Cisco ASR 1002 Router
The route processor for the Cisco ASR 1002 Router is integrated in the chassis and supports all the
typical customer management interfaces such as the Ethernet network management port and console and
auxiliary serial ports of the route processor for the Cisco ASR 1006 and ASR 1004 routers. It also has
LED status indicators, an RJ-45 plug for a BITS timing reference and one USB ports which can be used
with smart cards for secure key distribution or for image or configuration file
the Cisco ASR1000-RP1 LEDs for the Cisco ASR 1002 Router.
Figure 2-3
pwr
stat
The embedded route processors for the Cisco ASR 1002 Router provides connection for one SPA bay
and the circuitry for the a built-in 4xGE SPA.
The Cisco route processor for ASR 1002 Router meets the requirements of route processors for the
Cisco ASR 1006 and the Cisco ASR 1004 routers; except for the following deviations:
•
•
•
•
•
•
Table 2-8
Table 2-8
LED Label
PWR
STAT
OL-13208-11
A console port can run up to 115.2 kbps with hardware flow control. One port is used as the
CONSOLE port for secure configuration and status display. The default BAUD rate for the
CONSOLE port should be set at 9600 BAUD. Both the console and auxiliary ports are asynchronous
serial ports.
Embedded Cisco ASR1000-RP1 LEDs
ASR 1002
min
maj
crit
No SATA hard drive supported. Bulk file storage is on a large fixed eUSB device (up to 8 GB (bytes)
supported).
No support for redundant route processors.
Hardware memory and storage options (such as DRAM) are not field upgradeable.
Network clock changes. No second BITS clock input supported.
The LED order is from top to bottom on the route processor is MIN, MAJ, CRIT.
The Cisco ASR1000-RP2 is not supported on the Cisco ASR 1002 router or Cisco ASR 1002-F
router
lists the Cisco embedded ASR1000-RP1 LEDs and behaviors.
Cisco Embedded ASR1000-RP1 LEDs in the Cisco ASR 1002 Router
LED
Power
System status
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
Color —State Behavior Description
Solid green All power requirements are within
specification
Off Off, the router is in standby mode.
Solid green Cisco IOS has successfully booted.
Cisco ASR 1000 Series Route Processor
updates.Figure 2-3 shows
2-17