Connecting Power to Cisco ASR 1004 Router
Figure 7-19
Figure 7-19
End View
0.48
0.08
Step 4
Attach the other end of the cable to the site ground connection.
Caution
Before you continue to install the terminal block wires, stop and perform Step 5. To prevent any contact
with metal lead on the wire and the plastic cover.
You must wrap the positive and negative cables with sleeving. Take each wire and cover the area from
Step 5
the lug to the wire with heavy shrink sleeving.
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
7-28
shows the –48 VDC power supply grounding wire and stud.
Cisco ASR 1004 Router –48 VDC Power Supply Grounding Wire and Stud
Ø 0.267
2 holes
0.25
0.63
Chapter 7
All measurements in inches
2.24
Crimp area
0.37
Cisco ASR 1004 Router Overview and Installation
OL-13208-11