Cisco ASR 1000 series Hardware Installation Manual page 390

Installation Methods
Table 12-5
Output
12V
3.3V
Power Cords Supported by the Cisco ASR 1001 Router
Table 12-6
Table 12-6
Power Cord Item Number
15454-M-ACCBL-R2
CAB-AC-RA
CAB-ACA-RA
CAB-ACC-RA
CAB-ACE-RA
CAB-ACI-RA
CAB-ACR-RA
CAB-ACS-RA
CAB-ACU-RA
CAB-IND-RA
CAB-JPN-RA
Installation Methods
Cisco ASR 1001 Router is designed for standalone, two rail 19-inch rack-mount (front rail only), four
rail 19-inch rack-mount (front and rear rail).
Although rack-mounting is the preferred method of installation for the Cisco ASR 1001 Router, you can
mount the chassis on an equipment shelf or tabletop.
Warning This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this device.
Statement 1071
Before you install, operate, or service the system, read the Regulatory Compliance and Safety
Warning
Information for Cisco ASR 1000 Series Aggregation Services Routers publication. This document
provides important safety information you should know before working with the system. Statement 200
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
12-16
–48 VDC Power Supply Output Voltage Alarm Threshold Ranges
Minimum
10.0-11.2V
2.6 - 3.0 V
lists the power cords that are supported by the Cisco ASR 1001 Router.
Power Cords Supported by the Cisco ASR 1001 Router
Description
AC Power Cable ANSI 220VAC Right Exit
Power Cord, 110 V, Right Angle
Plug, Power Cord, Australian, 10 A, Right Angle
Power Cord China, Right Angle
Power Cord Europe, Right Angle
Power Cord, Italian, Right Angle
Power Cord Argentina, Right Angle
Power Cord, Switzerland, Right Angle
Power Cord UK, Right Angle
Power Cord India, Right Angle
Power Cord-Japan, Right Angle
Chapter 12 Cisco ASR 1001 Router Overview and Installation
Maximum
12.8-13.8V
None
OL-13208-11