Cisco ASR 1000 series Hardware Installation Manual page 295

Chapter 10 Cisco ASR 1002-X Router Overview and Installation
Cisco ASR 1002-X Router Description
Use only the AC power supplies or the DC power supplies in the Cisco ASR 1002-X Router. Do not mix
Caution
power supply types.
Cisco ASR 1002-X Router Slot Numbering
The Cisco ASR 1002-X Router contains an integrated SIP that supports three half-height SPAs or one
half-height SPA and one full-height SPA. The SPA bays are Bay 1, Bay 2, and Bay 3. The router provides
a built-in 6 Gigabit Ethernet interface, and this SPA is physically located on the integrated route
processor board. The built-in 6xGE SPA ports are located in the SPA Bay 0 and addressed as GE 0/0/x.
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
10-5
OL-13208-11