Electrostatic Discharge Prevention - Cisco ASR 1000 series Hardware Installation Manual

Chapter 14 Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
Removing and Replacing Cisco ASR 1000 Series Router SPAs
and SPA Interface Processors
This section contains the following topics:
•
•
•
•
•
Note For detailed information about SIP and SPA software commands such as activating and deactivating
SIPs, prepare for online insertion and removal of SPAs, and activate and deactivate configuration
examples, see
Guide.
The embedded shared port adapter interface processor (SIP) on the Cisco ASR 1002 Router and Cisco
Note
ASR 1002-F Router do not support online insertion and removal. However, the SPAs on the Cisco
embedded services processors do support online insertion and removal.
When removing or replacing SPAs, make certain that all the screw fasteners on each card and each SIP
Caution
are screwed in tightly to prevent accidental removal of another card. Each SIP has two screw fasteners
per slot and each SPA has two screw fasteners.
We suggest you have the following tools and parts readily available for installation of the SIPs and SPAs:
•
•
•
•
•
•
If you need additional equipment, contact a service representative for ordering information.

Electrostatic Discharge Prevention

Electrostatic discharge (ESD) damages equipment and impairs electrical circuitry. ESD occurs when
printed circuit boards are improperly handled and results in complete or intermittent failures.
OL-13208-11
Removing and Replacing Cisco ASR 1000 Series Router SPAs and SPA Interface Processors
Electrostatic Discharge Prevention, page 14-51
Removing the Cisco ASR 1000 SPA Interface Processor, page 14-53
Replacing the Cisco ASR 1000 SPA Interface Processor, page 14-53
Removing a Shared Port Adapter from a SIP, page 14-54
Replacing a Shared Port Adapter in a SIP, page 14-54
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation
Number 2 Phillips or a 3/16-inch flat-blade screwdriver
Shared port adapter interface processor (SIP)
Shared port adapters (SPAs)
Cables
Your own ESD-prevention equipment or the disposable grounding wrist strap included with all
upgrade kits, field-replaceable units (FRUs), and spares
Antistatic mat or surface, or static shielding bag
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
14-51