Cisco ASR 1000 series Hardware Installation Manual page 387

Chapter 12 Cisco ASR 1001 Router Overview and Installation
Cisco Embedded ASR1000-SIP10 and SPAs for the Cisco ASR 1001 Router Description
The Cisco embedded ASR1000-SIP10 is built into the Cisco ASR 1001 Router. The Cisco embedded
ASR1000-SIP10 provides the physical and electrical termination for up to three SPAs, built-in 4xGE
SPA, one half-height SPA bay, and one integrated daughter card (system configurable).
The Cisco embedded ASR1000-SIP10 interface, like the Cisco ASR 1006 Router and Cisco ASR 1004
Router, supports all Cisco embedded ASR1000-SIP10 functions and services. However, the Cisco
embedded ASR1000-SIP10 differs in the following areas:
•
•
The Cisco ASR 1001 Router embedded ASR1000-RP1 also provides the circuitry for the built-in 4xGE
SPA.
Table 12-2
Function
GE SFP STATUS
(one per port)
Cisco ASR 1001 Router Integrated Daughter Card Description
The ASR 1001 Router supports different flexible integrated daughter cards with their own LEDs. Four
of these integrated daughter cards are based on SPAs and use the same external I/O ports as those SPAs.
One of the integrated daughter cards supports a single hard-disk-drive for other applications.
Table 12-3
Table 12-3
Function
Daughter Card Port
Status (one per port)
Cisco ASR1000-ESP for the Cisco ASR 1001 Router Description
The Cisco ASR 1001 Router supports the Cisco ASR1000-ESP2.5 and Cisco ASR1000-ESP5 (with
license) embedded services processors.
Table 12-4
OL-13208-11
Functions as the base board for Cisco embedded ASR1000-RP1
Is not a field-replaceable unit (FRU) and does not support online insertion and removal (OIR).
Only the shared port adapter (SPA) on the Cisco embedded ASR1000-SIP10 in SPA Bay 1
Note
of the Cisco ASR 1001 Router supports OIR.
Table 12-2 describes the built-in SPA LEDs.
Built-In SPA LEDs
Color
Amber
Green
describes the built-in SPA LEDs.
Built-In SPA LEDs
Color
Amber
Green
describes the Cisco ASR 1001 LEDs.
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
Description
Indicates that the port is enabled by software, but there is a
problem with the Ethernet link.
Indicates that the port is enabled by software and there is a
valid Ethernet link.
Description
Amber indicates the port is enabled by software, but there
is a problem with a port connection.
Green indicates the port is enabled by software and
operational.
Cisco ASR 1001 Router Description
12-13