Removing and Replacing the Cisco ASR 1001 Router Power Supplies
Figure 14-77
Figure 14-77
1
Turn off the circuit breaker to the power supply.
Step 2
For easier installation, plug the power cable into the inlet on power supply slot 1 first.
Step 3
Insert the power supply cable into the power supply in slot 0 on the left.
Step 4
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
14-104
shows the Cisco ASR 1001 Router AC power supply standby switch.
Cisco ASR 1001 Router AC Power Supply Standby Switch
Cisco ASR 1001 Router AC power supply Standby switch. This switch does not disconnect
power from the power source.
Chapter 14
Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
0
1
1
OL-13208-11