Cisco ASR 1000 series Hardware Installation Manual page 442

Removing and Replacing the Hard Drive on the Cisco ASR 1002-X Router
•
•
Removing the Hard Drive from the Cisco ASR 1002-X Router
To remove the hard drive from the Cisco ASR 1002-X Router, follow this procedure:
Run the request platform hardware filesystem harddisk: offline command.
Step 1
Slip on an ESD-preventive wrist strap.
Step 2
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
14-12
request platform hardware filesystem harddisk: offline (unmounts the hard disk)
–
request platform hardware filesystem harddisk: online (mounts the hard disk.)
–
The reason you may be removing an internal hard drive is that it is failing or failed; so any data
recovery may be lost.
If the drive is functioning, you can back it up to a drive plugged into a USB port using the archive
tar command.
Chapter 14 Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
OL-13208-11