Christie CP4230 User Manual page 170

Appendix B: Serial API
Restore Whole or Part of a Backup (RST)
Restore files from a backup file.
SUBCODE DESCRIPTION OF USE
CHAN
Restore only channel settings.
CONF
Restore only configuration settings.
FULL
Restore all settings including channel, config, preferences, and user.
ICPF
Restore only ICP files. The cinema projector must be in power up mode.
LIST
List backup files in the FTP root that can be used with restore.
PREF
Restore only preferences.
STAT
Get status of last restore command.
USER
Restore only users.
EXAMPLES:
(RST+LIST?) Print a list of existing backup files that can be used for restore
(RST+CHAN 7) Restore channel information from the backup file with index 7 from the list displayed by the command above
(RST+FULL "Solaria.20110201153514.Backup") Complete a full restore from the file specified (must be in power up mode)
(RST+USER "E:/ Solaria.20110309211519.Backup") Restore user information from a backup file located on a USB stick
NOTE: Use forward slashes as path separators.
(RST+STAT?) Check the status of last restore operation
Screen Format (SCF)
elect Screen format file which describes the geometry for the output image.
S
SUBCODE DESCRIPTION OF USE
Cxxx
Replace xxx with the channel number. Valid range is 101 - 164.
NONE
Select screen file for the current channel.
EXAMPLES:
(SCF+C108 "FLAT") Use file "FLAT" on channel 108
(SCF+C108?) Get screen file name on channel 108
(SCF?L) List all available entries of screen control
Schedule (SCH)
Schedule a power up or a power down at a specific time.
SUBCODE DESCRIPTION OF USE
BPON
Bypass power on scheduling. 1 = enable, 0 = disable
BPOF
Bypass power off scheduling. 1 = enable, 0 = disable
B-22 CP4230 User Manual
020-100621-03 Rev. 1 (05-2014)