Display; Panel Resolution And Refresh Rate; Achiev; Achievable Contrast Ratio - Christie CP4230 User Manual

Appendix A: Specifications
This section provides detailed CP4230 specifications. Due to continuing research, specifications are subject to
change without notice.
A.1 Display
A.1.1 Panel Resolution and Refresh Rate
Pixel format (H x V square pixels)
Processing path
3D (24 fps per eye input, DLP Cinema®
Processing), Full Image (2048 x 1080)
A.1.2 Achievable Brightness
2.0 kW (CDXL-20)
3.0 kW (CDXL-30)
4.5 kW (CDXL-45)
6.0 kW (CDXL-60)
NOTES: 1) Center point measurement only, with new lamp running at rated nominal power, except CDXL-60
lamps being run at 6.6kW. 2) Color corrected per TI's DLP Cinema® Trademark Guideline (2503068).
A.1.3 Achievable Contrast Ratio
450:1 ANSI, 1850:1 Full Frame ON/OFF
A.1.4 Color and Grayscale Resolution
Displayable colors
Grayscale resolution
A.1.5 White Point
Theatres:
Nominal White
Review Rooms:
Nominal White
CP4230 User Manual
020-100621-03 Rev. 1 (05-2014)
(Measured at Screen Center)
(full white, after calibration to Telecine mode)
(full white, after calibration to Telecine mode)
2048 x 1080/4096 x 2160
23.97 - 120Hz
144 Hz (frame tripled)
Nominal
8,000 lumens
14,000 lumens
20,000 lumens
30,000 lumens
35.2 trillion
45 bits total linear, 15 bits per RGB component
x = 0.314 ± 0.002
y = 0.351 ± 0.002
x = 0.314 ± 0.002
y = 0.351 ± 0.002
Maximum
10,000 lumens
16,000 lumens
23,000 lumens
32,500 lumens
A-1