Christie CP4230 User Manual page 167

Network (NET) (Continued)
MAC0
Gets the MAC address of the cinema projector
SUB0
Set the WAN subnet mask for the cinema projector
EXAMPLES:
(NET+ETH0 "192.168.1.35") Set new IP address on the MGMT Ethernet controller
(NET+GATE "192.168.0.1") Set the gateway
(NET+SUB0 "255.255.255.0") Set the subnet mask on the MGMT Ethernet controller
(NET+HOST "MyHostName") Set the host name
(NET+ETH0 ?) Retrieve IP address from the MGMT Ethernet controller. (NET+ETH0! 192.168.1.35)
(NET+MAC0 ?) Retrieve MAC address from MGMT controller. (NET+MAC0! 00:12:3F:7B:76:B4)
(NET+GATE ?) Retrieve default gateway. (NET+GATE! 192.168.0.1)
(NET+DLP0 "192.168.206.10") Set IP address (deprecated)
(NET+DLP0?) (NET+DLP0! "192.168.206.10") Query IP address (deprecated)
cinema projector Configuration File (PCF)
Set cinema projector Configuration File (PCF) file for the specified channel. This file is used to configure many
aspects of the cinema electronics. It will only be used if PCF in use (PIU) control is set.
SUBCODE DESCRIPTION OF USE
Cxxx
Replace xxx with the channel number. Valid range is 101 - 164.
NONE
Select PCF file for the current channel.
EXAMPLES:
(PCF+C108 "SCOPE 2.39") Use PCF file "Scope 2.39" on channel 108. File used when PIU is on
(PCF?L) List all entries of PCF control
Pureformity Color Technology (PCT)
Sets or returns the Pureformity Color Technology (PCT) format file which implements color correction on the cin-
ema projector.
SUBCODE DESCRIPTION OF USE
Cxxx
Select the PCT file for the specified channel. Replace xxx with the channel number.
NONE
Select or return the PCT file for the active channel using the index or file name.
NFLT
Return a list of all PCT files in the ICP. Does not filter out files that are not available for use on the cinema
projector. This sub-code only supports list queries (?L).
EXAMPLES:
(PCT+C108 ?) Get the current PCT file for channel 108.
(PCT?) Get the current active PCT file.
(PCT " PCT file name") Select the specified PCT file by name for the active channel.
(PCT 2) Select the specified PCT file by index for the active channel.
(PCT +C108 "PCT file name") Select the specified PCT file by name for channel 108.
(PCT +C108 2) Select the specified PCT file by index for channel 108.
(PCT?L ) List all available entries of PCT files. Only lists files that are available for use on the cinema projector. For example,
on a 4K cinema projector, only 4K PCT files are listed.
(PCT+NFLT?L) List all PCT files. Lists all files regardless of whether they are available for use on the cinema projector or not.
CP4230 User Manual
020-100621-03 Rev. 1 (05-2014)
Appendix B: Serial API
B-19