Connect A Communications Device - Christie CP4230 User Manual

Section 3: Connect Devices to the Cinema Projector
3.1

Connect a Communications Device

To communicate with the cinema projector, connect the equipment to the Ethernet hub or switch.
For applications or equipment utilizing serial communications, use the Christie-proprietary serial protocol to
connect to the RS232 PIB port on the PIB. When using Christie serial protocol over Ethernet connect to port
5000. NOTICE: The RS232 PIB port located on the PIB faceplate utilizes Christie-proprietary protocol and is
intended for Christie accessories or automation controllers only.
3-2
From External
Ethernet Hub
Serial Link
Cinema Server
Communication Device
Serial Communication Device
CP4230 User Manual
020-100621-03 Rev. 1 (05-2014)